2CarPros - Car Questions & Answers

1997 Chevrolet Cavalier Repair Question


Topics covered: Fuse, Test light, Fuel pump.
Mileage: No information provided.

Asked on June 14, 2012

Why won't the engine start if it fires up n rolls over

Replied on June 14, 2012

So you didnt use a noid light and you dont know if there pulsing?

Tiny Answered by saturntech9 (expert)
23,190 answers provided
Replied on June 14, 2012

No I didnt, where can I find a noid light srry my dad told me they checked um but he didn't checked the actual pulse

Tiny Response from Travette91
2 questions asked
Replied on June 14, 2012

did u check the injecter fuse for voltage and injecter for pulse.

Tiny Answered by cadieman (expert)
2,862 answers provided

Replied on June 14, 2012

We checked the injector fuse but not the pulse

Tiny Response from Travette91
2 questions asked
Replied on June 14, 2012

what about voltage at the fuse

Tiny Answered by cadieman (expert)
2,862 answers provided
Replied on June 14, 2012

No haven't checked that , is there a way to check it without the noid light, the people who own auto stores over here are retards they don't know what noid lights are

Tiny Response from Travette91
2 questions asked

Replied on June 14, 2012

all u need is a reg. test light with a bulb they are cheap.if u dont know what it looks like goggle it.

Tiny Answered by cadieman (expert)
2,862 answers provided
Replied on June 14, 2012

I would use a computer safe test light if your going to test it with a test light.One side of the connector will have power key on engine off. The other side will be a pulsing ground while cranking.If you get a computer safe test light with two aligator clips one for power and one for ground it will tell you if you have power or ground and wont have to swap the aligator clip from power to ground when checking for power and the ground pulse.

Tiny Answered by saturntech9 (expert)
23,190 answers provided
Replied on June 15, 2012

just buy a dam test light and ck. for voltage at the fuse.then youll have to do what saturntech9 said.all im trying to find out if voltage at a fuse im done ty for using 2car pros

Tiny Answered by cadieman (expert)
2,862 answers provided