It doesn't want to start from the inside i put the switch and jumped the starter and the car turns on and the cars runs fine?

1996 ACURA INTEGRA

150,000 MILES • 4 CYL • FWD • MANUAL

ACARRASQUILLO

MEMBER
1 POST
FOLLOW

I have a Acura integra thats doesnt want to start from the inside i put the switch and jumped the starter and the car turns on and the cars runs fine. I pressed the button of the clutch pedal by hand that works to start car and still nothing. I checked all the fuses and everything looks good i want to know is there a sensor or relay or a cable inside that went out. Please i need help on this 100% confused on what to do.

Jun 24, 2011 at 12:56 AM

RASMATAZ

CAR REPAIR CONTRIBUTOR
75,992 POSTS

It sounds like the ignition switch is no good which is common, here is how you can check the switch out in the diagrams below. Here is a guide to help you check the connections at the switch and the wiring diagrams below so you can see how it works and which wires to test.

https://www.2carpros.com/articles/how-to-check-wiring

Check out the diagrams (Below). Please let us know what happens.

Images (Click to enlarge)

Jan 26, 2017 at 6:52 PM

Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.