I have to replace brake lines from proportioning.

Tiny
CHRISCHARRIER
  • MEMBER
  • 1995 TOYOTA AVALON
  • 20,000 MILES
I have to replace brake lines from proportioning valve back to the rear wheels, I can't figure out which lines on the valve go to the rear wheels.
Do you
have the same problem?
Yes
No
Wednesday, October 31st, 2012 AT 4:55 PM

6 Replies

Tiny
BRIEN P
  • MEMBER
  • 19 POSTS
Follow the lines from rear wheel to prortioning valve
Was this
answer
helpful?
Yes
No
Wednesday, October 31st, 2012 AT 5:00 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
If you have not disconnected the lines, mark them first.
Was this
answer
helpful?
Yes
No
Wednesday, October 31st, 2012 AT 5:08 PM
Tiny
CHRISCHARRIER
  • MEMBER
  • 1 POST
Guess I should have been clearer, there's a plastic grate over the old lines, I don't want to replace the old lines, I am going over that grate and using it for mounting the lines, was hoping someone could give me clock positions on what each line is on the valve.
Was this
answer
helpful?
Yes
No
Wednesday, October 31st, 2012 AT 8:26 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Sorry I could not find any diagrams in our database for the the lines.
Was this
answer
helpful?
Yes
No
Wednesday, October 31st, 2012 AT 8:52 PM
Tiny
CARADIODOC
  • MECHANIC
  • 33,689 POSTS
Remove them at the wheels, then remove one at the valve and blow air through it. Look at the wheels to see which one has brake fluid sprayed out of it.

Hi KHLow2008.
Was this
answer
helpful?
Yes
No
Wednesday, October 31st, 2012 AT 9:32 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Thanks caradiodoc.
Was this
answer
helpful?
Yes
No
Wednesday, October 31st, 2012 AT 9:45 PM

Please login or register to post a reply.

Sponsored links