95 Mitsubishi Diamante fuel filter replacement

Tiny
CALIGUYATHEART86
  • MEMBER
  • 1995 MITSUBISHI DIAMANTE
  • FWD
  • AUTOMATIC
How do I replace the fuel filter on a 95 mitsubishi diamante
Sunday, March 13th, 2011 AT 10:29 PM

1 Reply

Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
FUEL FILTER
Removal And Installation

Removal steps

1. Battery
2. Battery tray with washer tank assembly
3. Eye bolt
4. Gasket
5. High Pressure fuel hose
6. Fuel main pipe connection
7. Mounting bolt
8. Fuel filter
9. Eye Bolt
10. Gasket
11. High pressure fuel pipe

Removal Service Point
EYE BOLT REMOVAL

Remove the eye bolt while holding the fuel filter nut securely.

CAUTION: Cover the hose connection with rags to prevent splash of fuel that could be caused by some residual pressure in the fuel pipe line.

Installation Service Point
FUEL FILTER INSTALLATION

1. When installing the fuel filter, first temporarily install the filter to the filter bracket; then insert the main pipe at the connector part of the high pressure fuel pipe, and manually screw in the main pipe's flare nut.

2. Holding the fuel filter nut, tighten the fuel main pipe's flare nut and eye bolt at the specified torque. Then tighten the filter to the bracket.
Was this
answer
helpful?
Yes
No
Monday, May 30th, 2011 AT 5:27 PM

Please login or register to post a reply.

Sponsored links