SPONSORED LINKS

1995 Mercury Grand Marquis radiator

Tiny
STUBBFAM
  • MEMBER
  • 1995 MERCURY MARQUIS
1995 Mercury Grand Marquis. Replaced intake manifold. Now cannot get water/coolant back into radiator. How?
Tuesday, June 21st, 2011 AT 4:39 PM

5 Replies

Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
Any chance switch up gaskets and blocked off water port to head?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, June 21st, 2011 AT 4:43 PM
Tiny
STUBBFAM
  • MEMBER
  • 3 POSTS
Intake manifold came completely assembled. All we had to do was slip it into place, put hoses back on, and bolt it down. Where would I look for the block?
Was this
answer
helpful?
Yes
No
Tuesday, June 21st, 2011 AT 4:48 PM
Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
So installed no gaskets? Could you explain radiator won't take coolant? Engine running and adding coolant right?
Was this
answer
helpful?
Yes
No
Tuesday, June 21st, 2011 AT 5:07 PM
Tiny
STUBBFAM
  • MEMBER
  • 3 POSTS
Gaskets were already installed on manifold when bought it. Filled plastic coolant tank, ran engine, coolant never left plastic tank. We know that the coolant had drained out when replacing manifold. That's why we're trying to refill radiator.
Was this
answer
helpful?
Yes
No
Tuesday, June 21st, 2011 AT 5:14 PM
Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
Remove top hose fill up then attach start should take from tank then
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, June 21st, 2011 AT 5:48 PM

Please login or register to post a reply.

Related Radiator Replace/Remove Content

Radiator Replacement Kia Sportage
VIDEO
Radiator Replacement Kia Sportage
Instructional repair video
Radiator Replacement
GUIDE
Radiator Replacement
A radiator removes heat from the engine through thermal heat exchange using coolant as a conductor and is usually located in the front of the vehicle under the hood. A ...
VIEW MORE

Sponsored links