Seem to be vapor locked can't get them to bleed

If there are four lines coming out of the master cylinder, can you get one front wheel to bleed or one rear one? Any chance the brake fluid is contaminated? If it is, the bladder seal under the reservoir cap will be blown up and mushy. Here is a video and guide below to help you bleed the brake system correctly.

https://youtu.be/w7gUsj2us0U

and

https://www.2carpros.com/articles/how-to-bleed-or-flush-a-car-brake-system

and

https://youtu.be/WDxvEQrMkBg

Please run down these guides and report back.