SPONSORED LINKS

Engine trouble

Tiny
WATTDERRICK
  • MEMBER
  • 1995 CHEVROLET BLAZER
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 250,000 MILES
Why is engine******** and cutting off after spark plug and wire change? Is it because the wires are in wrong place?
Wednesday, December 22nd, 2010 AT 2:10 AM

3 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
If the engine wasn't do it before you changed the plug's and wire's then I would make sure none of the plug's are broken there gaped properly and the wire's are routed correctly.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, December 22nd, 2010 AT 2:18 AM
Tiny
WATTDERRICK
  • MEMBER
  • 5 POSTS
I made the mistake of not doing one plug at a time. I believe the wires are mixed up. I dont know the correct firing order.
Was this
answer
helpful?
Yes
No
Wednesday, December 22nd, 2010 AT 2:34 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
I posted the firing order for you to check and see where you went wrong.
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
Wednesday, December 22nd, 2010 AT 11:48 PM

Please login or register to post a reply.

Related Engine Stall While Driving Content

Code Read Retrieval/Clear Chevrolet
VIDEO
Code Read Retrieval/Clear Chevrolet
Instructional repair video
Engine Stalls While Driving
GUIDE
Engine Stalls While Driving
An engine that stalls while driving and then starts back up again, either immediately or after a short time is different from an engine that just wont start or if the...
VIEW MORE

Sponsored links