transmissions

1994 TOYOTA PICKUP
4 CYL • 4WD • AUTOMATIC
Avatar
JESSIEEEO9
  • MEMBER
  • 3 POSTS
what is the difference in toyota transmission 8980 S and 8980 10
Apr 15, 2011 at 2:26 AM
Advertisement
Avatar
FACTORYJACK
  • CAR REPAIR CONTRIBUTOR
  • 4,159 POSTS
What is that number off of? I am showing automatic transmission types as A340F for 2.4, and A340H for 3.0. The manual transmission is shown as G40, G57, G58, W46, W55, W56, R150 and R15OF. That seems like a lot of options, more than would be available for just the pickup. Those may be all manual transmissions in all trucks, or even allmanuals in 1994 vehicles, it does not specify.
Apr 15, 2011 at 3:55 AM
Avatar
JESSIEEEO9
  • MEMBER
  • 3 POSTS
its off the side of the transmissions. our old transmission slips & we purchased a new one but the the transfer cases are different. we're trying to figure out whether or not we could put the old transfer case on the new transmission.
Apr 16, 2011 at 5:58 PM
Avatar
FACTORYJACK
  • CAR REPAIR CONTRIBUTOR
  • 4,159 POSTS
The number may be a serial number, or something specific to the manufacturer of the transmission(aisin). What were the specifics from the transmission that you purchased?, was it a newer year, or different engine size? The only consideration is the mounting of the transfer case(is it the same bolt pattern?), and whether or not the number of splines on the output shaft are the same. Unless of course you got one from a six cylinder and it was supposed to be a four cylinder, then you might be dealing with more specifics like gear ratios.
Apr 18, 2011 at 5:04 AM
Avatar
JESSIEEEO9
  • MEMBER
  • 3 POSTS
ok. thanks for your time
Apr 18, 2011 at 7:40 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.