SPONSORED LINKS

1994 Isuzu Rodeo replacing a lug stud

Tiny
MS871
  • MEMBER
  • 1994 ISUZU RODEO
  • V6
  • 4WD
  • AUTOMATIC
  • 98,000 MILES
I am replacing a lug stud on this vehicle. I have all the bolts holding the wheel hub out. I got the wheel hub moved about 1.5 centimeters out, it will not move any further. Is there a step I missed to remove it.
Thursday, July 9th, 2015 AT 2:23 PM

1 Reply

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,269 POSTS
I don't know if you have automatic hubs or manual hubs. I have attached an exploded view of both systems. Take a look at them and let me know if they help.

On the automatic hub, there are six bolts that need removed to take off the hub cap and housing. Once that is off (and you have the caliper off) there is a lock washer and then the hub nut. Once that is off, the rotor/hub assembly should come off. NOTE: Look at number 4. It is a snap ring and shims. They MUST be removed.

Also, make sure the vehicle is in 2wd.

Let me know if this helps.

Joe
Images (Click to make bigger)
Thumb
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+2
Thursday, July 9th, 2015 AT 8:37 PM

Please login or register to post a reply.

Related Bearing Hub Content

Bearing Hub Failure Symptoms
GUIDE
Bearing Hub Failure Symptoms
Wheel bearing hubs, or bearing hubs are used to support the vehicle while allowing the wheels to roll, they also can contain ABS wheel speed sensors. In this guide we will...
VIEW MORE

Sponsored links