New brake lines. Problem with brand new caliper grabbing

Clutch is fine. Cuz I can hold the accelerator a little moment and it idles right above 1k as it should. It just idles really low when im coming out of gear and when the engine rpms are coming down to a stop.

I have not. Tonight, 8-29-12 driving across town it didnt do it once. Hmm. Im at a loss. Ill check that out. Where exactly is it located?

Well now the car is completely quitting almost 75% of the time when im stopping. Hadnt had a chance to take the part off because for a while there it wasnt doing it at all. Then about a week ago it started acting up again. Would I just be able to replace the part? Winter is drawing near and I work 36 hours a week on top of full time school so I have very little time to be taking things apart. Thanks louie

No engine codes, just replaced the part now. Went for a test drive. When pushing the clutch in to stop the engine revs at around 2kRPM and when completely stopped for 3 to 5 seconds engine speed starts to come back down as it did before. This is normal correct?

Yes. My father reminded me to spray carb cleaner in and around it. Car idles at 3k for about 45 seconds after finishing.

The coolant temp sensor was recently replaced if memory serves me right. And no I have not had a chance to disconnect the battery quite yet. At least the car isnt dying at each stop sign now.

Still no chance to disconnect the battery, but idles down between 1200 and 1500 while rolling to a stop. Seems normal to me.