Radiator

Drain rad, loosen the fan clutch bolts/nuts while belts are still tight and hold the fan hub, remove drive belt(s), locate and remove fan shroud bolts/nuts, remove fan clutch attaching bolts/nuts and lift the fan shroud and fan out of engine compartment. You may need to remove upper rad hose at rad before you can do this and anything else that is in the way of this removal. Remove lower rad hose at rad, locate the rad attaching hardware and remove, lift rad out and reverse all to reinstall, add 50/50 mixture of coolant and water and start engine and then monitor thermostat operation while topping off coolant as needed till done.