I need help. My car. Has issues.

Tiny
RILEYMRO
  • MEMBER
  • 1991 LINCOLN TOWN CAR
  • V8
  • 2WD
  • AUTOMATIC
  • 220,000 MILES
Hi. I recently bought a 1991 lincoln towncar. It worked great for about a week then the driver side window went down. And wouldnt come up. With some pressing of the button and some faith. It finally moseyed on up. I just left it alone until I had time to figure out the cause. You can hear the motor running inside of it. Its not a steady humm, its a on, off, on off rapid sound. Now. I rolled the other 3 windows down today, and the rear passenger stayed down and wouldnt come up. So.I took the door panel off. No problem getting it off, but now what am I supposed to do. Its doing the same thing as the other one. Its not a fuse because the lighter still works and the stuff on the same fuse as the power windows. Help!
Thursday, August 18th, 2011 AT 12:56 AM

13 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
For the front you will have to remove the inner door panel and see if the gear on the window regulator is striped or the motor gear drive is striped. With the back one does it make any noise when moving the switch up or down?
Was this
answer
helpful?
Yes
No
Thursday, August 18th, 2011 AT 1:15 AM
Tiny
RILEYMRO
  • MEMBER
  • 7 POSTS
Yes. Both of them make the same on, off, on, off rapid sound. I saw on a different site that you could take the motor off the regulator and clean a gear in there somewhere. Is that plausible?
Was this
answer
helpful?
Yes
No
Thursday, August 18th, 2011 AT 2:12 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Iam not sure about that I just looked a some pics of some new front and rear regulators and there those cable operated from the motor to move the glass up and down so most likely ethier the cable etc has broken somewhere or the gear/gear box on the motor striped out. Your going to have to take a closer look at whats going on. The regulators are reasonable.I can help you find a great price on the parts you need. You just have to look and tell me whats broken.
Was this
answer
helpful?
Yes
No
Thursday, August 18th, 2011 AT 2:21 AM
Tiny
RILEYMRO
  • MEMBER
  • 7 POSTS
It's probably the motor then. Or the regulator. The cables r fine. It still turns the cable a little, but it just doesn't have the strength to pull it up. If I replace the two. I'm gonna replace them all.
Was this
answer
helpful?
Yes
No
Thursday, August 18th, 2011 AT 3:10 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Or the cable spool is bound up where the motor goes on. Www. Rockauto. Com has motors and regulators I have a 5 percent discount code for them also if you intrested.
Was this
answer
helpful?
Yes
No
Thursday, August 18th, 2011 AT 5:03 PM
Tiny
RILEYMRO
  • MEMBER
  • 7 POSTS
Thanks:) maybe. So is it the regulator or the motor? The cable isnt loose, like its broke. It still has tension, I'm not one to use a/c much so I usually ride with the Windows down, but the people I bought it from very rarely did so. So I don't know if that would be any help in figuring out which one. I ordered a shop manual for it, but won't get it for a few days.
Was this
answer
helpful?
Yes
No
Saturday, August 20th, 2011 AT 1:48 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Without seeing it in person and how it operates I really couldnt tell you which one it is I usually when there is cable operated regulators I replace the motor and regulator. Have you gone to rock auto to price them yet?I still have that 5 percent discount code I will share with you if you need it.
Was this
answer
helpful?
Yes
No
Saturday, August 20th, 2011 AT 1:59 AM
Tiny
RILEYMRO
  • MEMBER
  • 7 POSTS
I looked them both up. Does the regulator get stripped out, or does the cable just have to break for that to go bad? Because the cable still turns (a little) and still has tension. If its possible for them to strip out then it could still be the regulator.
Was this
answer
helpful?
Yes
No
Sunday, August 21st, 2011 AT 8:22 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
The motor spins the large pulley to move the cable to make the window go up or down. The cable can become fraid and bind up or where the cables hook the regulator can break there. Your probably going to end up needing a motor and regulator. Like I said before on that set up I replace both.
Was this
answer
helpful?
Yes
No
Sunday, August 21st, 2011 AT 9:19 PM
Tiny
RILEYMRO
  • MEMBER
  • 7 POSTS
Hm. Wonderful. Lol. I thank you for the help, I'm just not thrilled about putting $400 dollars into it. Lol. But I guess I will have to. Or at least one at a time. I would be much grateful for the savings code u were talking about earlier:)
Was this
answer
helpful?
Yes
No
Sunday, August 21st, 2011 AT 10:51 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Here is th ediscount code put it in the how did you hear about us code when your placing your order 62539003242193
The right rear window reg is 20 the left front reg is 52 the motors are left front motor is 28 and the right rear motor is 40 so if you replace the two bad ones its not 400. Its a 1991 your going to have window issues I have replaced window regulators on cars less then a year old.
Was this
answer
helpful?
Yes
No
Sunday, August 21st, 2011 AT 11:12 PM
Tiny
RILEYMRO
  • MEMBER
  • 7 POSTS
Ok. Thanks for the advise. I'll get it done. It's one of four cars so its not of the most great importance at the moment, but it will have to be done. Lol.
Was this
answer
helpful?
Yes
No
Sunday, August 21st, 2011 AT 11:22 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Your welcome thats what were here for anytime.
Was this
answer
helpful?
Yes
No
Sunday, August 21st, 2011 AT 11:28 PM

Please login or register to post a reply.

Sponsored links