SPONSORED LINKS

1995 Toyota Tercel slipping gears

Tiny
MCHAMBERLIN
  • MEMBER
  • 1995 TOYOTA TERCEL
  • 4 CYL
  • 2WD
  • MANUAL
  • 185,000 MILES
What makes a manual shift 95 tercel slip out of third gear? I had the clutch replaced last year. Someone said it could be the flywheel or do I need the transmission replace?
Friday, August 15th, 2008 AT 10:27 AM

1 Reply

Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Hi mchamberlin,

If it is slipping only out of 3rd gear, it is nothing to do with the clutch.

The trans is bad due to worn synchroniser rings, hub and/or sleeve. Might be due to loose holding nut of the output shaft bearing or a bad clutch sgaft bearing. You need to strip the trans to check out.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, August 31st, 2008 AT 11:36 PM

Please login or register to post a reply.

Related Flywheel Replace/Remove Content

Flywheel Replacement
GUIDE
Flywheel Replacement
An engine flywheel is used to couple the engine to the transmission while holding the clutch assembly. When replacing a flywheel the transmission and clutch must be removed...
VIEW MORE

Sponsored links