I have a 1994 Toyota Corolla DX that I just replaced the clutch master cylinder and the slave cylinder in last week. Before they were replaced, I had to engage the clutch to start the engine and afterwards it would start in neutral. We had some problems with air in the line after replacing the cylinders, but it was an easy fix and I thought everything was ok.
Today when I went to start the car nothing happened. The dash lights, dome lights, and headlights would come on but the engine wouldn't click or anything. I was able to get some guys to give me a push start and pop the clutch so I could drive home. I let the car run for about 30 minutes and shut it off. When I tried to start it again I got the same results.
I am reading all these other questions and seeing problems with starter motors and alternators... I am just not sure where to begin testing to see what is wrong. Please Help!!!
Thanks!
Tara
Today when I went to start the car nothing happened. The dash lights, dome lights, and headlights would come on but the engine wouldn't click or anything. I was able to get some guys to give me a push start and pop the clutch so I could drive home. I let the car run for about 30 minutes and shut it off. When I tried to start it again I got the same results.
I am reading all these other questions and seeing problems with starter motors and alternators... I am just not sure where to begin testing to see what is wrong. Please Help!!!
Thanks!
Tara
Jul 28, 2008 at 4:39 PM