Brakes

SATURN
Avatar
MSSCORPIO79
  • MEMBER
  • 2 POSTS
Brakes had pressure before changing the front, now there is no pressure whatsoever. Thre is also no tension in the emergency brake. We bleed the brakes and still no pressure, please help !!!!! THis is a Saturn sl2
Feb 10, 2007 at 9:06 PM
Advertisement
Avatar
SERVICE WRITER
  • CAR REPAIR CONTRIBUTOR
  • 9,123 POSTS
Was the emergency brake with tension before the job?
Feb 11, 2007 at 5:24 AM
Avatar
MSSCORPIO79
  • MEMBER
  • 2 POSTS
Yes there was plenty of tension before doing brake job
Feb 11, 2007 at 11:39 AM
Avatar
SERVICE WRITER
  • CAR REPAIR CONTRIBUTOR
  • 9,123 POSTS
Is this rear drum?

If so, The emergency brakes on have to do with the rear. What I am concerned with would be to pull the rear drums off the back brakes and see what is going on.

Are you losing the brake pedal after the reservior is filled?

You need to turn you focus to the rear at this point.

Check the cables going towards the rear also.
Feb 11, 2007 at 12:12 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.