SPONSORED LINKS

2002 Pontiac Grand Am Body Control module

Tiny
MAMABEAR03
  • MEMBER
  • 2002 PONTIAC GRAND AM
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 178,745 MILES
My car starts but anything on the dash board such as spedometer, gas gauge, heat gauge needles will not move. My mechanic mentioned it was not the fuses but the body control module that I have to take to the dealer. Any suggestions?
Sunday, January 17th, 2010 AT 1:11 PM

1 Reply

Tiny
MMPRINCE4000
  • MECHANIC
  • 8,549 POSTS
If BCM is malfunctioning it should set a "B" error code, which your mechanic should be able to read with the proper scanner.

I would check all fuses first before replacing the BCM.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, January 19th, 2010 AT 8:50 AM

Please login or register to post a reply.

Related Electrical BCM Content

BCM Replacement
GUIDE
BCM Replacement
As with any computer, any component inside the unit can go bad such as a transistor, IC or resistor. Subject to vibration, heat, coldness and moisture the BCM is built to...
VIEW MORE

Sponsored links