SPONSORED LINKS

No crank no start

Tiny
BRANDONT39
  • MEMBER
  • 2001 FORD TAURUS
  • 3.0L
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 190,000 MILES
The vehicle has no crank and no start checked all fuses in both fuse boxes and checked the fuse box under hood to see if they had power when key is in on position and they all did. Hooked up a scanner to car and it could not read ECM and said check ignition it dose have an alarm system stock and and insurance companies scanner for how your driving is hard wired in to fuse box under dash.
SPONSORED LINKS
Thursday, September 19th, 2019 AT 5:16 PM

1 Reply

Tiny
KASEKENNY
  • MECHANIC
  • 18,907 POSTS
Hi,

We need to dig deeper into the fact that you cannot communicate with the ECM. Can you take a picture of the scan tool and post it here when it says to check the ignition?

When you turn the key to the on position do all the gauges come on and the lights?

Let me know and we can go from there. Thanks
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, September 19th, 2019 AT 6:48 PM

Please login or register to post a reply.

Related Engine Not Cranking Over Content

Not Cranking Over
GUIDE
Not Cranking Over
When your engine is not cranking (turning) over it will be mainly due to three separate areas, first it could be the battery, cables or poor connection, next is the starter...
VIEW MORE

Sponsored links