wont start

CHEVROLET
Avatar
JCAST27
  • MEMBER
  • 1 POST
2004 chev classic E C O tec 2.2 liter 70,000miles

engine cranks over ,has 56 lbs fuel pressure in gas rail. when i pour a little gas in throttle body engine starts for a couple of seconds then dies out? i
tried OBD 11 auto scanner , no codes found! now what? appreciate any ideas that can help.
Aug 25, 2007 at 7:26 PM
Advertisement
Avatar
RASMATAZ
  • CAR REPAIR CONTRIBUTOR
  • 75,992 POSTS
[quote:7f595205e7="jcast27"]2004 chev classic E C O tec 2.2 liter 70,000miles

engine cranks over ,has 56 lbs fuel pressure in gas rail. when i poor a little gas in throttle body engine starts for a couple of seconds then dies out?
tried OBD 11 auto scanner no codes found! now what?



already made a donation thanks[/quote:7f595205e7]

Sounds like the injectors are not pulsing or its clogged up-could also be the driver in the computer or the computer is not getting a reference signal from the ignition and preventing the injector to come On to prevent the catalytic converter from burning up. Also could be inadequate fuel pressure.

Good Luck
Aug 25, 2007 at 7:33 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.