The idle runs at about 1500 RPM

Tiny
GTRBOY25
  • MEMBER
  • 2005 CHRYSLER SEBRING
The idle runs at about 1500 rpm. I changed out the IAC valve, made sure all vacuum hoses are connected, cleaned the throttle body, and checked all fuses. Everything is good but it still idles high. Should I try adjusting the idle screw or have a mechanic look at it to possibly diagnose the problem? I did have the engine code ran and it said that one of the things I listed was the problem. Please help. It would be much appreciated.
Do you
have the same problem?
Yes
No
Thursday, February 21st, 2013 AT 7:38 PM

12 Replies

Tiny
WRENCHTECH
  • MECHANIC
  • 20,758 POSTS
No, no, no. Don't try to adjust the idle. It's not adjustable. That's just a base stop. What are the exact code numbers being set?
Was this
answer
helpful?
Yes
No
Thursday, February 21st, 2013 AT 7:51 PM
Tiny
GTRBOY25
  • MEMBER
  • 7 POSTS
I can't remember I would have to get the code ran again.
Was this
answer
helpful?
Yes
No
Friday, February 22nd, 2013 AT 4:25 AM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,758 POSTS
That would be your next step.
Was this
answer
helpful?
Yes
No
Friday, February 22nd, 2013 AT 10:39 AM
Tiny
GTRBOY25
  • MEMBER
  • 7 POSTS
The code is still showing iac valve. P0507
Was this
answer
helpful?
Yes
No
Saturday, February 23rd, 2013 AT 3:00 PM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,758 POSTS
Was` that code cleared since changing the IAC? If not, then you need to clear it and see what resets if anything.

Check all the throttle linkage and throttle plate and make sure it is closing all the way.
Was this
answer
helpful?
Yes
No
Saturday, February 23rd, 2013 AT 3:15 PM
Tiny
GTRBOY25
  • MEMBER
  • 7 POSTS
Ok. How do I clear the code?
Was this
answer
helpful?
Yes
No
Saturday, February 23rd, 2013 AT 3:20 PM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,758 POSTS
With a code reader.
Was this
answer
helpful?
Yes
No
Saturday, February 23rd, 2013 AT 3:23 PM
Tiny
GTRBOY25
  • MEMBER
  • 7 POSTS
Ok. So can I go to pepboys or some place like that and have them clear it?
Was this
answer
helpful?
Yes
No
Saturday, February 23rd, 2013 AT 4:57 PM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,758 POSTS
I don't know about PepBoys doing it free but AutoZone or Advance will.
Was this
answer
helpful?
Yes
No
Saturday, February 23rd, 2013 AT 5:12 PM
Tiny
GTRBOY25
  • MEMBER
  • 7 POSTS
Ok. Well I'm at work now so I'll do it in the morning. So do I clear the code and then get it reran?
Was this
answer
helpful?
Yes
No
Saturday, February 23rd, 2013 AT 7:11 PM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,758 POSTS
You'll probably have to drive it some in the meantime to give it a chance to set again.
Was this
answer
helpful?
Yes
No
Saturday, February 23rd, 2013 AT 7:46 PM
Tiny
GTRBOY25
  • MEMBER
  • 7 POSTS
Ok. Can I unhook the negative terminal and reset the computer?
Was this
answer
helpful?
Yes
No
Saturday, February 23rd, 2013 AT 7:52 PM

Please login or register to post a reply.

Sponsored links