2003 toyota camry

2003 TOYOTA CAMRY
170,000 MILES • 6 CYL • FWD • AUTOMATIC
Avatar
JAY921
  • MEMBER
  • 2 POSTS
im trying to replace my water pump, and im stuck at the cover thats covering the water pump. the timing belt is loose now, and now im just stuck at that. im not sure if its the screws or what please help as soon as possible thanks.

jay
Nov 20, 2010 at 3:55 AM
Advertisement
Avatar
RASMATAZ
  • CAR REPAIR CONTRIBUTOR
  • 75,992 POSTS
REPLACEMENT


DRAIN COOLANT
REMOVE FRONT WHEEL RH
REMOVE FRONT FENDER APRON SEAL RH
REMOVE V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1
REMOVE VANE PUMP V BELT
REMOVE ENGINE MOVING CONTROL ROD
REMOVE ENGINE MOUNTING STAY NO.2 RH
REMOVE GENERATOR BRACKET NO.2
REMOVE CRANKSHAFT PULLEY SST 09213-54015 (91651-60855), 09330-00021, 09950-50013 (09951-05010, 09952-05010, 09953-05010, 09954-05030)
REMOVE TIMING BELT NO.1 COVER
REMOVE TIMING BELT NO.2 COVER
REMOVE TRANSVERSE ENGINE MOUNTING BRACKET
REMOVE TIMING BELT GUIDE NO.2
REMOVE TIMING BELT








REMOVE TIMING BELT IDLER SUB-ASSY NO.2
Remove the bolt and timing belt idler sub assembly No. 2.
REMOVE CAMSHAFT TIMING PULLEY SST 09960-10010, (09962-01000, 09963-01000) 09249-63010
REMOVE TIMING BELT NO. 3 COVER








REMOVE WATER PUMP ASSY
Remove the 4 bolts, 2 nuts and water pump assembly.
Image (Click to enlarge)
Attached Media
Nov 20, 2010 at 4:00 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.