Sunday, February 13th, 2011 AT 7:56 AM
SINGLE67
- MEMBER
- 2003 GMC SIERRA
- V8
2003 gmc sierra- back taillights burn out
SPONSORED LINKS
2003 GMC Sierra
2 Replies
RASMATAZ
- MECHANIC
- 75,992 POSTS
TAIL/TURN SIGNAL LAMP REPLACEMENT (EXCEPT STEPSIDE)
REMOVAL PROCEDURE
Ensure that the headlamp switch is in the OFF position.
Lower the end gate.
Remove the 2 screws retaining the tail/turn signal lamp assembly to the body.
Identify the bulb in need of replacement.
The top bulb is a parking lamp and stop lamp
The center bulb is a turn indicator lamp
The lower bulb is a backup lamp
Turn the socket assembly.
Remove the socket assembly from the housing
REMOVAL PROCEDURE
Ensure that the headlamp switch is in the OFF position.
Lower the end gate.
Remove the 2 screws retaining the tail/turn signal lamp assembly to the body.
Identify the bulb in need of replacement.
The top bulb is a parking lamp and stop lamp
The center bulb is a turn indicator lamp
The lower bulb is a backup lamp
Turn the socket assembly.
Remove the socket assembly from the housing
SPONSORED LINKS
Was this helpful?
Yes
No
Sunday, February 13th, 2011 AT 8:05 AM
RASMATAZ
- MECHANIC
- 75,992 POSTS
See below
Was this helpful?
Yes
No
Sunday, February 13th, 2011 AT 8:06 AM
Related Running Light Content
Running Light Bulb Replacement - Front
Instructional repair video
Sponsored links
SPONSORED LINKS
Running Light Bulb Replacement - Front
How to Use a Test Light
