FORD ESCAPE NOISE PROBLEM
2003 Ford Escape • 140,000 miles
2003 4wd ford escape V6 cd4e transmission. It slips into gear then grabs then slip again, same with reverse. There is also a light rattle/grind noise up front. At first I thought it was the tcc solenoid so I replaced that but obviously didnt fix it. Im going to start tearing into it this weekend and would like to get a direction. Thanks in advance for any advice.
January 23, 2013.
January 23, 2013.
If the fluid level is correct, then the filter may be clogged. Otherwise you have an internal failure
Yeah its okay but is a little burnt. Ive changed it twice to get all the old fluid out and kinda flush it. Im thinking maybe tc but im not sure because of the noise. Its not like gears grinding it more of a slipping rattle.
Torque converter is possible but I would have pressure testes done to pinpoint the issue rather than guess
Makes clanking noise while on fwd and reverse... drive shaft was removed to decrease sound. Just bought this truck under the promise that only bearings needed to be replaced.. Upon ...
3 answers • 1999 Chevrolet Silverado • 148,000 miles
Dear sir. I have a mark II , GX110. I have the following issue with the car. There is a pink noise like a dry bearing noise coming from the timing belt cover. Diagnostic. When I ...
7 answers • 2001 Toyota MR2 • 130,000 miles
Hi, I've been hearing this really weird noise coming from the left side of the hood (right side if you are in the cabin)since after about 1 week of picking the car up brand new from ...
6 answers • 2012 Kia Rio • 2,000 miles
My car has recently passed its mot so i cant see what is making this noise it goes louder on speed and when you slow down u can hear the noise going quieter and i dont hear anything on ...
1 answer • 1998 Vauxhall Corsa • 104,100 miles