That is 208,000 miles!

Response from reaganx5
1 question asked

so it's still having the problem? what did plugs look like?

Answered by fixitmr
24 questions asked

Retest the fuel pressure. What sort of pressure, if any, is the pump delivering? If nothing, see if the pump is receiving power. If not check the relay and the fuse.

Then have it scanned for soft codes. The blinking CEL means a soft code that isn't serious enough to cause the CEL to light solid, but bad enough to cause catalytic damage. You have to specify that you want soft codes pulled, because the less expensive scanners won't do it.

Answered by rivermikerat (expert)
5,494 answers provided

We put new plugs in. Light is no longer blinking but it still runs very rough. Have to get the RPM's up to get it to even partially run.

Response from reaganx5
1 question asked

Have you replaced the cap and rotor?

Answered by czr1760
10 questions asked

Again, have it scanned for soft codes. The blinking CEL says at least one was set. And most cheap scanners won't pull soft codes.

Also, check for loose connections and vacuum leaks.

Answered by rivermikerat (expert)
5,494 answers provided