SPONSORED LINKS

2003 Audi Allroad air suspention

Tiny
327IMPALA1
  • MEMBER
  • 2003 AUDI ALLROAD
  • 2.7L
  • V6
  • TURBO
  • AWD
  • AUTOMATIC
  • 137,000 MILES
Air suspension stop working, over-nite I started the car and green light lights didn't come on. Some days the first level light comes on and the air pump works but other days it doesn't. And the other day I started the car and all lights and levels worked the system is koko. Please help.
SPONSORED LINKS
Monday, January 27th, 2014 AT 7:41 AM

8 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
It either has a n air leak someplace like shocks or lines or the pup isn't getting called on have this scanned for codes.
Was this
answer
helpful?
Yes
No
Monday, January 27th, 2014 AT 8:25 AM
Tiny
327IMPALA1
  • MEMBER
  • 30 POSTS
Is scanning the only way to check the air suspension system?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, January 28th, 2014 AT 7:29 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
If you can hear the pump come on then start checking all around the car for an air leak if car isnot going up. It can be an air line/socks etc. Or the pump and as these are run by modules they need to be scanned to see why or if there is something wrong with the system.
Was this
answer
helpful?
Yes
No
+1
Tuesday, January 28th, 2014 AT 7:49 AM
Tiny
327IMPALA1
  • MEMBER
  • 30 POSTS
How can I manully check the air pump, can I put power and ground to it
Was this
answer
helpful?
Yes
No
Wednesday, January 29th, 2014 AT 8:58 AM
Tiny
327IMPALA1
  • MEMBER
  • 30 POSTS
And I guiss if there is a problem with any electrical component like the pump the module shut the system down. Is that how it works?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, January 29th, 2014 AT 9:03 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
If you do not have a scanner that has bilateral controls for this car and leveling system you can not fix it the pump is controlled by an ecu so it needs to see why it's screwing up. About the only thing you can check are the fuses 5-7-15-17 in dash and the level controller relay in relay panel. Other than what other info I've given you it has to bescanned.
Was this
answer
helpful?
Yes
No
+1
Wednesday, January 29th, 2014 AT 9:31 AM
Tiny
327IMPALA1
  • MEMBER
  • 30 POSTS
Can the esp be reprogrammed without a scanner?
Was this
answer
helpful?
Yes
No
Monday, February 24th, 2014 AT 8:23 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
No a scanner must be used for reprogramming
Was this
answer
helpful?
Yes
No
+1
Tuesday, February 25th, 2014 AT 6:34 AM

Please login or register to post a reply.

Related Suspension Auto Ride Not Working Content

Sponsored links