Did you ask the question earlier about not shifting into 2nd and fourth gear?Are your cables broken or just the cable end that hooks to the inside shifter?Because those were available by themselves i have replaced them before.
Nov 5, 2012 at 5:18 PM
WAYNEERTLEYSR
MEMBER
11 POSTS
the cable ends look fine
Nov 5, 2012 at 5:50 PM
SATURNTECH9
CAR REPAIR CONTRIBUTOR
30,869 POSTS
So the cables cable ends etc are all moving like they should?Also does the clutch pedal have pressure all the way to the floor?
Nov 5, 2012 at 5:54 PM
WAYNEERTLEYSR
MEMBER
11 POSTS
yes
Nov 5, 2012 at 5:57 PM
WAYNEERTLEYSR
MEMBER
11 POSTS
i have good clutch pedal
Nov 5, 2012 at 6:00 PM
SATURNTECH9
CAR REPAIR CONTRIBUTOR
30,869 POSTS
Iam only asking if the linkage and cables clutch etc are working correctly because if there are all that is left is the transmission.I.cant look and see whats happened on my end.
Nov 5, 2012 at 6:18 PM
WAYNEERTLEYSR
MEMBER
11 POSTS
ok thanks
Nov 5, 2012 at 6:24 PM
SATURNTECH9
CAR REPAIR CONTRIBUTOR
30,869 POSTS
Your welcome thats what were here for.
Nov 5, 2012 at 6:34 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.