I WAS WONDERING IF THE CRANKSHAFT SENSOR WIRING FROM A 98 4.6L V8 CROWN VICTORIA FIT MY F 150 4.6L V8 CAUSE IM SWAPPING MOTORS
2002 Ford F-150 • 175,000 miles
Im swapping motors and i want to know if they fit right!!!
The ends may be the same but the wiring behind it may be different.
K the wiring behind what? And before i do this can i swap these motors and if so will there be anything i have to change?
The long block are the same assuming you are changing the same size. all the externals from your will have to go on the donor motor. it is a labor intensive job and you need to be carefull. use all new gaskets on everything transferred.
Is the block on a 93 crown victoria 4.6l v8 the same i made a mistake awhile ago it is a 93 instead of a 98?
The long blocks will work.
I inherited someone elses problem... the engines in the cradle but none of the wires/sensors were hooked up, most are easy enough, but I want to make sure that I hook up the right wires...
2 answers • 1984 Oldsmobile Ciera • 100,000 miles
My interior lights power windows and moon roof still not working after changing fuse. Fuses just blow out. I can't find wiring schematics anywhere. I have spent too much money trying...
2 answers • 2008 Ford Fusion • 29,000 miles
Where can I find a printable door wiring diagram for a 94 oldsmobile cutlass ciera s series the driver's door
6 answers • 1994 Oldsmobile Cutlass
I have a 2000 grand prix gtp s/c. I just did an engine swap but can't find where one wire goes. It's on the harness with the oil filter holder and it's a single plug but can't seem to ...
7 answers • 2000 Pontiac Grand Prix