All of sudden wouldn't shift into gear

Tiny
AMIEK7882
  • MEMBER
  • 2001 TOYOTA COROLLA
  • 118,000 MILES
On my way home from work the other night, my car all of sudden wouldn't shift into gear. I noticed about a week prior that my clutch was getting soft.

I have never had the clutch replaced, so does this have anything to do with it?
Thursday, October 4th, 2012 AT 9:20 PM

11 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
So it will physically shift into gear it just wont move when letting out the clutch?
Was this
answer
helpful?
Yes
No
Thursday, October 4th, 2012 AT 9:28 PM
Tiny
AMIEK7882
  • MEMBER
  • 5 POSTS
It was, but now I can't get it into any gear. I have it sitting in my parking lot right now in neutral.
Was this
answer
helpful?
Yes
No
Thursday, October 4th, 2012 AT 9:54 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
So you cant shift it into first gear the shifter will fight you an won let it hapen?
Was this
answer
helpful?
Yes
No
Thursday, October 4th, 2012 AT 10:10 PM
Tiny
AMIEK7882
  • MEMBER
  • 5 POSTS
Correct. I can't get it into any gear at all.
Was this
answer
helpful?
Yes
No
Thursday, October 4th, 2012 AT 10:27 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Even with the engine turned off?
Was this
answer
helpful?
Yes
No
Thursday, October 4th, 2012 AT 10:37 PM
Tiny
AMIEK7882
  • MEMBER
  • 5 POSTS
I can switch into gear with the car off.
Was this
answer
helpful?
Yes
No
Thursday, October 4th, 2012 AT 10:41 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
That sounds like a clutch not releasing does the clutch pedal have pressure all the way down to the floor?
Was this
answer
helpful?
Yes
No
Thursday, October 4th, 2012 AT 10:51 PM
Tiny
AMIEK7882
  • MEMBER
  • 5 POSTS
The clutch will go all the way down to the floor, but there is absolutely no pressure to the clutch what so ever :(
Was this
answer
helpful?
Yes
No
Thursday, October 4th, 2012 AT 10:56 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Sounds like the clutch hydraulics have failed so not as bad as the clutch failing repair wise.
Was this
answer
helpful?
Yes
No
Thursday, October 4th, 2012 AT 11:13 PM
Tiny
AMIEK7882
  • MEMBER
  • 5 POSTS
Do you think that I will need the master cylinder replaced as well?
Was this
answer
helpful?
Yes
No
Thursday, October 4th, 2012 AT 11:26 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
I would replace the master and the slave cylinder.
Was this
answer
helpful?
Yes
No
Thursday, October 4th, 2012 AT 11:38 PM

Please login or register to post a reply.

Sponsored links