Oil filter

Tiny
ZZZZZZ90
  • MEMBER
  • 2001 SATURN L100
  • 4 CYL
  • 2WD
  • MANUAL
  • 120,000 MILES
I was wondering how to change the oil filter on a 2001 saturn l100. Ive changed oil and filters before, but Ive never seen one like this before.
Sunday, March 13th, 2011 AT 11:27 PM

12 Replies

Tiny
PROTECH1980
  • MEMBER
  • 901 POSTS
It is a catridge filter front of engine right side below intake/ unscrew plastic (has molded nut on top) cap take out filter and replace, also replace o-ring, screw housing back in carefull not to overtighten.
Was this
answer
helpful?
Yes
No
Sunday, March 13th, 2011 AT 11:31 PM
Tiny
ZZZZZZ90
  • MEMBER
  • 5 POSTS
Ok so now that I found it do you have any suggestions on how to get it off? I think whoever changed the filter last time definately overtightened it. And I dont have a lot of tools.
Was this
answer
helpful?
Yes
No
Monday, March 14th, 2011 AT 12:05 AM
Tiny
PROTECH1980
  • MEMBER
  • 901 POSTS
Your going to have to find a socket to fit that plastic nut/ or last option find a good pair of channel locks that will fit down there and with steady moderate pressure loosen it.
Was this
answer
helpful?
Yes
No
Monday, March 14th, 2011 AT 12:09 AM
Tiny
ZZZZZZ90
  • MEMBER
  • 5 POSTS
Sounds good. Thanks a lot.
Was this
answer
helpful?
Yes
No
Monday, March 14th, 2011 AT 12:11 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Just to add to this answer i wouldn't use plier's to remove the cap it's plastic and doesn't take much to damage them.I would use a socket made for it like this one.

http://www.amazon.com/Lisle-14700-Filter-Wrench-2-2L/dp/B0009OMYAQ/ref=sr_1_1?ie=UTF8&s=automotive&qid=1300068865&sr=8-1
Was this
answer
helpful?
Yes
No
Monday, March 14th, 2011 AT 2:16 AM
Tiny
PROTECH1980
  • MEMBER
  • 901 POSTS
Thanks saturntech, I dont recomend pliers either but like I said last option and if you dont have the socket.
Was this
answer
helpful?
Yes
No
Monday, March 14th, 2011 AT 2:30 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Alright I just didn't want zzzzzz90 to take it as go ahead and use pliers. The best way to do it is get the 2.2L gm engine oil filter socket made to fit the nut on the oil filter cap they sell them all over the place. If your going to be doing the oil change's on that car you might as well just get one.I have one they work great.
Was this
answer
helpful?
Yes
No
Monday, March 14th, 2011 AT 4:41 PM
Tiny
ZZZZZZ90
  • MEMBER
  • 5 POSTS
Thanks guys, I was able to get it off and get the oil filter out no problem. One last thing though, could you tell me how to reset the change oil light on the dash? It's coming on everytime I start the car and it's starting to bug me.
Was this
answer
helpful?
Yes
No
Tuesday, March 15th, 2011 AT 12:59 AM
Tiny
PROTECH1980
  • MEMBER
  • 901 POSTS
1. At the under-hood relay center press the Red reset button and hold for 5 seconds.

2. The change oil light will flash.

3. The next key cycle the light should remain out. If not, repeat the procedure
Was this
answer
helpful?
Yes
No
+1
Tuesday, March 15th, 2011 AT 1:04 AM
Tiny
PROTECH1980
  • MEMBER
  • 901 POSTS
Sorry zz90, I forgot to tell you to open relay center, the red reset button will be in there.
Was this
answer
helpful?
Yes
No
+1
Tuesday, March 15th, 2011 AT 1:07 AM
Tiny
ZZZZZZ90
  • MEMBER
  • 5 POSTS
Good stuff. Thanks for all your help protech.
Was this
answer
helpful?
Yes
No
+1
Tuesday, March 15th, 2011 AT 1:17 AM
Tiny
PROTECH1980
  • MEMBER
  • 901 POSTS
No prob.
Was this
answer
helpful?
Yes
No
Tuesday, March 15th, 2011 AT 1:23 AM

Please login or register to post a reply.

Sponsored links