MAZDA 626 IGNITION SWITCH PROBLEM
2001 Mazda 626 • 126,478 miles
When I turn key to on position the car tries to start. I don't even have to turn the key all the way just turn it to the on position to car tries to start sometimes it'll start sometimes it won't when it doesn't start it starts to get some starts getting hot I smell electrical fire and I see smoke coming from underneath the hood in from the dash area is there something I'm unsure I'm thinking possibly mission switch but mission switch to very expensive and don't want to exchange if it's not the problem the battery seems good to starter seems good for remote start car starts just fine
December 9, 2012.
December 9, 2012.
Expose the igition switch wires and while its trying to start in the run position see if the green wire from the ignition switch has battery voltage?
As you can see from the wire diagram I posted if the green wire has power to it in the run positon you have a shorted out ignition switch.
From what i see you have a bad ignition switch because the green wire should only have power in the start position.Also the green wire gets power thru the switch so looks like the run position is shorted to the start position.Have you checked http://www.rockauto.com?You might be able to save some money getting it there.
Electrical problem 1994 Chevy Lumina 6 cyl Front Wheel Drive Automatic 104000 miles ignition switch went bad need to know how to take it out asap
1 answer • 1994 Chevrolet Lumina
Electrical problem 2000 Chevy Impala 6 cyl Front Wheel Drive Automatic 100000 miles What is the procedure to remove and replace the ignition switch?
1 answer • 2000 Chevrolet Impala
Electrical problem 1999 Oldsmobile Alero 4 cyl Front Wheel Drive Automatic 81,000 miles Im haveing some problem removeing the ignition switch on my Alero, I mamaged to remove the 2...
1 answer • 1999 Oldsmobile Alero
Electrical problem 1995 Jeep Cherokee 6 cyl Four Wheel Drive Automatic 198000 miles How do I replace the ignition switch?
4 answers • 1995 Jeep Cherokee