REPLACED INTAKE GASKET ON MY 4X4 AND ALSO THE CAMSHAFT SENSOR AND THE MOTOR NOW KNOCKS LOUDLY? OIL PRESSURE IS GOOD
2001 Chevrolet Blazer • 151,000 miles
Motor did not knock before I had the intake gasket replaced and also the sensor? I picked up the vehicle from the garage and drove it less than 5 miles and the truck was knocking? Took it back to garage and the owner came out and listened to it and said it needs a new engine? Took it to another garage in town for second opinion and they said the same thing. They didn't even take the time to hook it up and diagnose from computer? Oil pressure is good. The shop said they put a spacer in the sensor and then it worke
March 8, 2012.
March 8, 2012.
Just wondering what sensors i need to replace.codes as follows.p0135,p0155,p0133.two of the codes say bank 1 sensor 1 the other says bank2 sensor 1.I think bank means driver or ...
2 answers • 2002 Dodge Intrepid • 100,500 miles
Hi hope you can help, this is a general question. 2 wire sensors, crank and cam are referred to as inductive, magnetic, whilst 3 wire sensors are Hall effect. Can a inductive, magnetic ...
3 answers • 2010 All Other Makes All Other Models
I had a rough starting when cold issue. Checked the codes and discovered two codes for a lean condition in both banks. After not finding a vac leak, I replaced the MAF with a ...
2 answers • 2002 Chevrolet Silverado • 170,779 miles
Describe the type sensor of the Knock sensor is on this vehicle and how it should be tested.?
1 answer • 2002 Chrysler 300 • 100 miles