Stater replacement

Tiny
DRHACKINSTIEN
  • MEMBER
  • 2000 PONTIAC MONTANA
  • 6 CYL
  • FWD
  • MANUAL
  • 120,000 MILES
Replace stater on 2000 pontiac montana
Wednesday, January 5th, 2011 AT 6:45 PM

1 Reply

Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
REMOVAL PROCEDURE

IMPORTANT: This vehicle uses the PG260 F1 starter motor. The starter motor is serviced only as a complete unit.

1. Disconnect the battery ground (negative) cable from the battery.
2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
3. Remove the starter motor BAT terminal nut and electrical leads.
4. Remove the starter motor S terminal nut and electrical lead.
5. Remove the torque converter cover.

6. Remove the starter motor bolts.
7. Remove the starter motor.
Was this
answer
helpful?
Yes
No
-1
Wednesday, January 5th, 2011 AT 7:22 PM

Please login or register to post a reply.

Related General Content

Sponsored links