Camshaft and timing chain marks and timing?

Tiny
TJJEANES
  • MEMBER
  • 2001 PONTIAC GRAND AM
  • 2.4L
  • 4 CYL
  • 2WD
  • AUTOMATIC
Set timing chain
Wednesday, August 27th, 2014 AT 11:15 AM

16 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Seepic for marks/location
Was this
answer
helpful?
Yes
No
Thursday, August 28th, 2014 AT 6:48 AM
Tiny
TJJEANES
  • MEMBER
  • 2 POSTS
Thanks
Was this
answer
helpful?
Yes
No
Thursday, August 28th, 2014 AT 7:31 AM
Tiny
JAMES WOOTEN
  • MEMBER
  • 1 POST
  • 2000 PONTIAC GRAND AM
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 187,000 MILES
How to set timing marks for the timing chain?
Was this
answer
helpful?
Yes
No
Monday, June 14th, 2021 AT 10:29 AM (Merged)
Tiny
BLUELIGHTNIN6
  • MECHANIC
  • 16,542 POSTS
Here is the timing marks if that is what you were needing.
Was this
answer
helpful?
Yes
No
+4
Monday, June 14th, 2021 AT 10:29 AM (Merged)
Tiny
FOGUIE MCKINNIE
  • MEMBER
  • 50 POSTS
  • 2000 PONTIAC GRAND AM
  • 102,305 MILES
I have a 2000 pontiac grand am I need timing chain diagram
Was this
answer
helpful?
Yes
No
Monday, June 14th, 2021 AT 10:29 AM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Here ya go this is for a 3.4L as you didn't give engine size 2nd one with 2 cams is for a 2.4L next time give engine size.
Was this
answer
helpful?
Yes
No
-1
Monday, June 14th, 2021 AT 10:29 AM (Merged)
Tiny
2CP-ARCHIVES
  • MEMBER
  • 4,540 POSTS
  • 2000 PONTIAC GRAND AM
How to set timing marks?
Was this
answer
helpful?
Yes
No
+3
Monday, June 14th, 2021 AT 10:29 AM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Hello,

Here is the timing marks for the timing chain and camshafts. Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Was this
answer
helpful?
Yes
No
+3
Monday, June 14th, 2021 AT 10:29 AM (Merged)
Tiny
JOYCE ROBERSON
  • MEMBER
  • 1 POST
  • 1997 PONTIAC GRAND AM
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 100,500 MILES
I replaced the water pump and afterward I set the timming wrong and broke the valves on two cylinder I had them replace and attempted to reset the timming but when I try to turn the engine over by hand it will only turn about a 180 degree turn
Was this
answer
helpful?
Yes
No
Monday, June 14th, 2021 AT 10:31 AM (Merged)
Tiny
BMRFIXIT
  • MECHANIC
  • 19,053 POSTS
Pay a close tension to the guides and tensioner
recheck timing marks again


https://www.2carpros.com/forum/automotive_pictures/99387_Graphic2_110.jpg




https://www.2carpros.com/forum/automotive_pictures/99387_Graphic1_231.jpg

Was this
answer
helpful?
Yes
No
Monday, June 14th, 2021 AT 10:31 AM (Merged)
Tiny
FLYBUZZ67
  • MEMBER
  • 1 POST
  • 1996 PONTIAC GRAND AM
  • 4 CYL
  • 2WD
  • MANUAL
  • 161,000 MILES
Where do I find the timing marks on a 2.4 ltr dual overhead cam
Was this
answer
helpful?
Yes
No
Monday, June 14th, 2021 AT 10:31 AM (Merged)
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.


https://www.2carpros.com/forum/automotive_pictures/12900_timing_27.jpg

Was this
answer
helpful?
Yes
No
Monday, June 14th, 2021 AT 10:31 AM (Merged)
Tiny
SHADOW52
  • MEMBER
  • 1 POST
  • 1993 PONTIAC GRAND AM
I changed a blown head gasket. And I can't get the timing right. No compression. Rocker arm cover say's quad 4, but it is not a quad 4. It is one of those quads that were only put in 2% of the vehicles, so I can't find a book or info on it.I need help to get it going. Please! I'm a electrician if anyone needs answers on that subject.
Was this
answer
helpful?
Yes
No
Monday, June 14th, 2021 AT 10:32 AM (Merged)
Tiny
BMRFIXIT
  • MECHANIC
  • 19,053 POSTS
This is the timing marks hope it's what you're looking for let me know


https://www.2carpros.com/forum/automotive_pictures/99387_Graphic2_170.jpg




https://www.2carpros.com/forum/automotive_pictures/99387_Graphic1_366.jpg

Was this
answer
helpful?
Yes
No
Monday, June 14th, 2021 AT 10:32 AM (Merged)
Tiny
PRADOG
  • MEMBER
  • 2 POSTS
  • 1992 PONTIAC GRAND AM
  • 4 CYL
  • FWD
  • MANUAL
  • 49,000 MILES
What are the specificationns for the timing chain marks on a 2 cam, engine?
Was this
answer
helpful?
Yes
No
Monday, June 14th, 2021 AT 10:32 AM (Merged)
Tiny
OBXAUTOMEDIC
  • MECHANIC
  • 3,711 POSTS
Hello,

Here is the timing alignment....


https://www.2carpros.com/forum/automotive_pictures/188069_92grndamtim4cyldohc_2.jpg

Was this
answer
helpful?
Yes
No
Monday, June 14th, 2021 AT 10:32 AM (Merged)

Please login or register to post a reply.

Sponsored links