2000 Mazda Millenia Repair Question
Topics covered: Sensor, Engine, Transmission.
Mileage: 11,300 miles.
Mileage: 11,300 miles.
Asked on September 3, 2011
Where is the speed control sensor located, this would be the one for the transmission. It is not the one at the far left of the transmission which is
The sensor on the far left is a pulse type sensor and not the one i believe to be the source of my problems, rough shifting, hold light blinking, and erratic shift up and down. This is the 2.5LV6 and OBDII indicates a code PO715, also codes PO400, and PO303 were present. I have purchased a new sensor a SC176 but cannot locate the old one but a dealer says it is on top of transmission very close to the engine.
Asked by wwoodsAnswer
Replied on September 3, 2011
For what liter engine? Auto or Manual tranny??
Replied on September 4, 2011
It is the 2.5L V6 automatic transmission, I believe it is a 4speed auto.
Replied on September 4, 2011
P0715:Input/Turbine Speed SensorOn left side of engine compartment, in transmission
P0400: P0400 - Exhaust Gas Recirculation Flow Malfunction. Clean out the EGR valve
P0303: Cylinder no.3 misfire: check the sparkplug/compression/injector for no.3