00 jeep grand cherokee multiple/random misfire and stalls

2000 JEEP GRAND CHEROKEE
Avatar
DANIELWALKER-PETERS
  • MEMBER
  • 3 POSTS
Please help
Got an 00 jeep grand Cherokee 4.7 v8
It is throwing p1756 p0300 and at least 3 diffrent misfire codes for cylinders always different and every cylinder has been pulled
First i noticed really bad exhaust manifold leak causen the H02 sensors reading unmetered air. Extracted the broken bolts
Nothing still doing it
Did compression test getting. 90 - 100 all away around
replaced cam and crank sensors
Still nothing
Any ideas whay it might be
Oct 9, 2012 at 8:49 PM
Advertisement
Avatar
ASEMASTER6371
  • CAR REPAIR CONTRIBUTOR
  • 52,796 POSTS
what about the basics, like plugs and coil??

90-100 is low for that motor.

vacuum leaks?? injectors?? wiring to injectors??

Roy
Oct 9, 2012 at 8:55 PM
Avatar
DANIELWALKER-PETERS
  • MEMBER
  • 3 POSTS
Plugs replaced about 6 months ago along with coils
no vacuum keaks that i can tell wires for injectors look fine
fuel pressure is with in specs to the manual
Oct 9, 2012 at 8:59 PM
Avatar
ASEMASTER6371
  • CAR REPAIR CONTRIBUTOR
  • 52,796 POSTS
did you have the injectors professionally cleaned?? not an additie but a real direct injection cleaning??

Roy
Oct 10, 2012 at 1:14 AM
Avatar
DANIELWALKER-PETERS
  • MEMBER
  • 3 POSTS
No was going to hook up it tomorrow
also 1x1 ho2 sensor is bouncing from. .00 to .8 rapidly would and o2 sensor cause this and not though any codes
Oct 10, 2012 at 1:30 AM
Avatar
ASEMASTER6371
  • CAR REPAIR CONTRIBUTOR
  • 52,796 POSTS
it is working normally and will not cause this code.

Roy
Oct 10, 2012 at 2:44 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.