Timing cover installation

Tiny
GFDCAR1
  • MEMBER
  • 2000 GMC JIMMY
  • 6 CYL
  • 2WD
  • AUTOMATIC
I am replacing the timing cover on a 2000GMC Jimmy 4.3l 2wd, the new cover does not have a oil pan seal, the original is made into the oil pan gasket, can you replace cover without removing the oil pan and gasket also?
Wednesday, March 2nd, 2011 AT 4:44 AM

2 Replies

Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
Oil pan has to be removed to replace the front cover. Gasket should come with the cover and once removed, the gasket would be damaged.
Was this
answer
helpful?
Yes
No
Wednesday, March 2nd, 2011 AT 7:39 PM
Tiny
MJAMES
  • MEMBER
  • 3 POSTS
You can replace the front cover without dropping the pan if you are very careful. You must use silicone sealer on the oil pan portion of the timing cover. If you cannot position the cover then you will need to grind the edges of the lip for the oil pan gasket part of the timing cover until you get the proper fit.
Was this
answer
helpful?
Yes
No
Sunday, April 1st, 2012 AT 2:37 AM

Please login or register to post a reply.

Sponsored links