BCM location

AJ BAKER

MEMBER
2002 FORD F-250
6.8L
V10
4WD
AUTOMATIC
200,000 MILES

I have no turn signals, no reverse lights and no cruise control. I have been told that it could be that. Any other suggestions?

Wednesday, August 17th, 2016 AT 10:50 AM

4 Replies

HMAC300

MECHANIC
48,601 POSTS

For turn signals check fuses under hood and relays like trailer relays and hazard switch see if power is going in and out of multi function switch. Lights do not go through bcm. For cruise have it scanned for codes and check fuses as well under hood it may be the clock spring in steering wheel column or brake switch/abs problem for that. For back up lights make sure bulbs are good and check fuses then have scanned for codes to see if transmission range selector switch is working.

Image (Click to make bigger)

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

Wednesday, August 17th, 2016 AT 12:19 PM

BRENTM33

MEMBER
1 POST
2000 FORD F-250
70,000 MILES

I need to find my body control module on my 2000 F-250 so I can get the identification numbers off it to get a new one. Nk idea where it is or what it looks like really. Help please!

2000 Ford F-250 super duty. 5.4 liter V8. Auto. 4x4. A remote starter was being hooked up and I was told the bcm got fried. The 4x4 is engaged all time. Airbag light stays on sometimes and when it does the heater doesn't work. Various dash lights go on and off. Power locks don't work. Cruise control either.

Was this

answer

helpful?

Yes

No

Sunday, August 18th, 2019 AT 9:18 AM (Merged)

KEN L

MASTER CERTIFIED MECHANIC
42,895 POSTS

Hello,

Theses trucks do not have a BCM they have a GEM module which is located under the dash on the drivers side here are diagrams to help you see how to change it out.

Check out the diagrams (Below)

Please let us know if you need anything else to get the problem fixed.

Cheers, Ken

Images (Click to make bigger)