Car has spark, changed fuel pump and filter, sprayed carb cleaner into the intake and it fired but wouldn't run.
Oct 30, 2011 at 5:23 AM
Advertisement
HMAC300
CAR REPAIR CONTRIBUTOR
48,601 POSTS
check your fuel pressure, especially sinceyou gcan get it to fire with choke cleaner. Of course scan for codes as well and make sure no fuses for ecm/pump are blown. then recheck your pump install one of hte wires may have come off.
Oct 30, 2011 at 5:11 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.