1999 Jeep Laredo Jeep Grand Cherokee Laredo

PUFF1234

MEMBER
1999 JEEP GRAND CHEROKEE LAREDO
4.0L
V6
4WD
AUTOMATIC
198,000 MILES

The suv would run then dye so I put new plugs and a junk yard coil pack on it it still did it so after a week or so it dyed and now wont start at all now ther was never no code to pull up so I read a lot and it say crankshaft senser or camshaft senser so I replaced new ones iam getting spark and iam getting gas so dose any one have any ideal please help

7 Replies

HMAC300

MECHANIC
48,601 POSTS

Try resetting security system if no manual look online

Was this

answer

helpful?

Yes

Thursday, July 30th, 2015 AT 6:21 AM

PUFF1234

MEMBER
5 POSTS

Thanks I will give it a try

SPONSORED LINKS

Was this

answer

helpful?

Yes

Friday, July 31st, 2015 AT 11:26 AM

PUFF1234

MEMBER
5 POSTS

Resetting did not work any other thought thank u

Was this

answer

helpful?

Yes

Sunday, August 2nd, 2015 AT 12:24 PM

HMAC300

MECHANIC
48,601 POSTS

Check with wiggle test on crank sensor first then scan for codes check fuses under hood etc.

Was this

answer

helpful?

Yes

Sunday, August 2nd, 2015 AT 2:01 PM

PUFF1234

MEMBER
5 POSTS

I have a crv I have put all new stuff on front end both side half sheft inner outter tie rods upper and lower ball joints wheel hub but when I turn the wheel then when I turn it back it makes a load clunk then it wont do it again tell I turn the wheel again can u help