1999 Infiniti Q45 Repair Question
Mileage: 250,000 miles.
Where are other sensors related to the speed sensor @ transmission?
changed knock sensors and speed sensor @ thans. but the speed sensor code comes back , forgot to mention .The speed odometer is at 10 on standstill
and the rpm at 10 also the code is p0500a is this at wheel if so how will i determine witch one
Asked by jovon123Answer
you need a scan tool to verify a signal from the trans is reaching the pcm. if it is, you have a failed dash cluster. if not then the reason needs to be determined.
a shop has the actual scan tool you need. get some help with this
Roy
does not mean anything. each works independent of each other.
Roy
thanks sir just one more thing so you saying that if cluster is bad i can get a p0500 code with check el on?
yes, you can but it needs to be verified with a scan tool, not a guess. it is expensive if it is the cluster
Roy
now also the front wheel radels at times of bumps somone said it could be hub bearrings and i could get this as a set with sensor on it could this be true
has nothing to do with the speedometer, sorry, that is a separate issue
Roy