Why do I have Power loss at 3000 RPM only?

Tiny
STEVE099
  • MEMBER
  • 1999 INFINITI G20
  • 160,000 MILES
New Plugs, New Plug Wires, New Front and rear O2 sensor.
Replaced MAF, Cap, Rotor.
Had P0301 Code and rough Idle at take off. This was fixed by cleaning EGR.
No codes now, only the following, issue that can be created.
Speed up to 2800-3000 RPM and let foot off gas pedal, then If I excellerate, it then seems that gas is cut off at this point, will only speed up IF downshift occurs.

This also seems to happen when in second (2) at 4500 RPM.?

Steve
Do you
have the same problem?
Yes
No
Friday, September 30th, 2011 AT 6:55 PM

3 Replies

Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
Maybe fuel pressure have that checked
Was this
answer
helpful?
Yes
No
Friday, September 30th, 2011 AT 7:24 PM
Tiny
STEVE099
  • MEMBER
  • 2 POSTS
I will Check that, but when this happens I can put in neutral and rev to 7000 rmp not issues, Also injectors sound like the are all fine.
Was this
answer
helpful?
Yes
No
Saturday, October 1st, 2011 AT 1:02 AM
Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
Pressure 34 psi vacuum connected at idle 43 psi vacuum disconnected
Was this
answer
helpful?
Yes
No
Saturday, October 1st, 2011 AT 7:39 PM

Please login or register to post a reply.

Sponsored links