code P0104?

Did you ever check and see if the egr port was cloged up when you changed the valve?

Only checked the opening with my finger before attaching the new EGR. I assume that the intake would have to be removed to thoroughly remove the carbon deposits.

Some people have cleaned them without removing the intake depends how clogged they are.A easy way to see if its clogged is to remove the egr valve start the engine for a few secs the rpms should go up fast without touching the gas pedal and you should hear a loud exhaust leak.Are sure you have a code P1404?

The code is P0401 (insufficient flow).

Thanks, JC

Sorry it is P0401 !

I had a feeling that was the code you had try checking for a clogged port like i suggested and we will go from there.

I'll do that and let you know.

Thanks again, JC

Keep me posted.

I removed the EGR. When I tried to start the motor it did not rev up and in fact would not run without giving it gas and died imediately when I let off the gas.

Sounds like the intake side is clear did you hear a loud exhaust leak from the egr valve being off?

Yes to the exhaust leak sound.

Anything else I should try or do at this point ????

I posted the trouble tree for your code P0401 follow it down till it goes to the next code listed.Let me know what you find sounds like the egr ports are clear.