1999 Chevrolet Suburban Replaced Brake Swich Relay Light Bulbs New Houseing

1999 CHEVROLET SUBURBAN
160,000 MILES
Avatar
CEDRIC1111
  • MEMBER
  • 1 POST
I replaced the brake swich the brake relay light bulbs and new houseing but still no brake lights when i step on brake
Oct 24, 2012 at 4:34 AM
Advertisement
Avatar
RASMATAZ
  • CAR REPAIR CONTRIBUTOR
  • 75,992 POSTS
Inspect/Test Stop/Haz fuse no.1 20amp-fuse okay and brake switch has power in and out-Have the turn and hazard switch checked/tested it has to come out of this switch to get to the stop lights-Also check ground point G415 at left frame rail behind bumper-also if it has a trailer connector inspect/test that too-could be corroded-Good Luck
Oct 24, 2012 at 4:52 AM
Avatar
CEDRIC1111
  • MEMBER
  • 1 POST
Thanks that is the only thing that i have not checked
Oct 24, 2012 at 4:59 AM
Avatar
RASMATAZ
  • CAR REPAIR CONTRIBUTOR
  • 75,992 POSTS
You're welcome
Oct 24, 2012 at 6:11 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.