SPONSORED LINKS

When truck is cold I have to flood the engine to.

Tiny
TREYPERKINS23
  • MEMBER
  • 1998 DODGE RAM
  • 153,000 MILES
When truck is cold I have to flood the engine to get it to start then I have to keep the rpm around 3 till it warms up then it runs great I can turn it off and it will start right back up but if it gets cold you have to restart the process. I have replaced the Idle Air Control Valve and the Throttle Position Sensor. I cleaned the throttle body. And it still does the same thing. What else could it be.
SPONSORED LINKS
Monday, January 28th, 2013 AT 5:07 AM

3 Replies

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Are there any codes?

How do flood the motor?

Coolant sensor controls cold operations. Look at the connector for corrosion.

Roy
Was this
answer
helpful?
Yes
No
Monday, January 28th, 2013 AT 11:35 AM
Tiny
TREYPERKINS23
  • MEMBER
  • 3 POSTS
No codes
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, January 28th, 2013 AT 3:08 PM
Tiny
TREYPERKINS23
  • MEMBER
  • 3 POSTS
I just changed the Engine Colant temp sensor to and still the same problem
Was this
answer
helpful?
Yes
No
Monday, January 28th, 2013 AT 7:30 PM

Please login or register to post a reply.

Related Idle Air Control Replace/Remove Content

Idle Air Control Motor Replacement
GUIDE
Idle Air Control Motor Replacement
The idle air control motor or idle speed control motor is designed to adjust the air flow into the intake manifold at engine idle. Engine idle speed is monitored by the PCM...
VIEW MORE

Sponsored links