How to fix the seat belt?

Tiny
MBROWNTHING
  • MEMBER
  • 2000 BUICK PARK AVENUE
  • 120,000 MILES
How to fix front seat belt won't come out how to fix? It is the bottom that ratchets. I tried pulling on it and was thought I might break it there is a side peace and the front piece raps over the top of it what do I do when I get the cover off
Thursday, May 17th, 2012 AT 5:31 AM

7 Replies

Tiny
PAPAJOHNSLICE
  • MEMBER
  • 108 POSTS
First things first you need the cover off, some are different then the others, check all around for any time of screw or bolt, or plugs to cover the screw or bolts, if non, then take a screw driver and gently but firmly pry off the cover, once the cover is removed, then it should be pretty straight forward, if you are replacing the seat belt, then you need to replace the entire retractor as well.

Here are some diagrams to help you get the problem fixed. See if the belt is folded inside the retractor.

Please let us know what you find.

Cheers
Was this
answer
helpful?
Yes
No
+1
Thursday, May 17th, 2012 AT 7:27 AM
Tiny
MBROWNTHING
  • MEMBER
  • 2 POSTS
OK thanks
Was this
answer
helpful?
Yes
No
Thursday, May 17th, 2012 AT 7:44 AM
Tiny
PAPAJOHNSLICE
  • MEMBER
  • 108 POSTS
No problem
Was this
answer
helpful?
Yes
No
-1
Thursday, May 17th, 2012 AT 7:47 AM
Tiny
DANIEL DAILEY
  • MEMBER
  • 12 POSTS
  • 1998 BUICK PARK AVENUE
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 75,000 MILES
How to you fix driver side shoulder twisted seat belt. On a 1998 buick park avenue?
Was this
answer
helpful?
Yes
No
+1
Thursday, March 9th, 2017 AT 2:07 PM (Merged)
Tiny
WRENCHTECH
  • MECHANIC
  • 20,757 POSTS
You simply have to twist the belt until it seats properly. If you're unable to get that done, then you just have to replace the belt assembly.
Was this
answer
helpful?
Yes
No
-1
Thursday, March 9th, 2017 AT 2:07 PM (Merged)
Tiny
BOBBIMERLE
  • MEMBER
  • 1 POST
  • 1999 BUICK PARK AVENUE
The passenger side seat belt is stuck, so that it will not pull out.
Was this
answer
helpful?
Yes
No
Monday, November 2nd, 2020 AT 11:02 AM (Merged)
Tiny
TY ANDERSON
  • MECHANIC
  • 684 POSTS
If you can unbolt the bottom end of the seat belt where is mounts to the floor or seat this will allow some slack & possibly unlocking the seat belt. If this doesn't work then seat belt retractor assembly will need to be replaced as long as nothing is jamming the seat belt from coming out.
Thanks for the question.
Was this
answer
helpful?
Yes
No
Monday, November 2nd, 2020 AT 11:02 AM (Merged)

Please login or register to post a reply.

Sponsored links