1997 toyota pu

1997 TOYOTA TACOMA
4 CYL • 4WD • MANUAL
Avatar
WILL40
  • MEMBER
  • 2 POSTS
i have a 1997 toyota tacoma pickup and it will not start. it will turn over and hit but will not start. i pulled the plugs out and they were very very wet with gas. i cleaned them and put them back in the engine. tryed to start again and after only one att. i pulled the plugs back out and they were very wet again. what would cause this?
Jan 13, 2011 at 11:22 PM
Advertisement
Avatar
RASMATAZ
  • CAR REPAIR CONTRIBUTOR
  • 75,992 POSTS
Check the injectors and fuel pressure regulator seems like its leaking
Jan 13, 2011 at 11:36 PM
Avatar
WILL40
  • MEMBER
  • 2 POSTS
ok i will do that. i also want to tell you that it has a code 1300
Jan 13, 2011 at 11:40 PM
Avatar
RASMATAZ
  • CAR REPAIR CONTRIBUTOR
  • 75,992 POSTS
P1300 will affect the ignition system -indicates a problem with the Igniter
Jan 21, 2011 at 10:19 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.