How do you replace the automatic window switch in a Saturn SL2?
Jun 14, 2011 at 3:21 PM
Advertisement
RASMATAZ
CAR REPAIR CONTRIBUTOR
75,992 POSTS
WINDOW SWITCH
Removal & Installation
Using a thin-blade screwdriver, pry between switch and door panel for spring clip (if equipped). Press down on clip to release switch and pry outward. Disconnect electrical connector and remove switch. To install, reverse removal procedure.
Jun 14, 2011 at 3:39 PM
SATURNTECH9
CAR REPAIR CONTRIBUTOR
30,869 POSTS
Just to add to this one if there talking about the window switches on the rear door panels that only work the window in the door there on that would be correct.If there talking about the master switch in the center console that works all the windows there is two small tangs on the rear of the switch facing the back seat one on each side of the rear of the switch.You would take two small pocket flat blade screwdrivers to depress the tangs and then pop the switch up and unplug the connectors.
Jun 14, 2011 at 5:09 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.