Saturn SC1 rear wheel bearing

Tiny
MMCCULLEY
  • MEMBER
  • 1997 SATURN SC1
  • 2WD
  • MANUAL
How to grease or replace rear wheel bearing (making a rumbling sound).
Wednesday, February 23rd, 2011 AT 8:12 PM

2 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
It's sealed you will have to replace the hub assembly you just remove the wheel and drum. Then you will see four 10mm bolt's holding the hub assembly remove the bolt's and replace the hub assembly.
Was this
answer
helpful?
Yes
No
Wednesday, February 23rd, 2011 AT 8:46 PM
Tiny
JASMINEMONAHAN
  • MEMBER
  • 8 POSTS
-Before lifting the vehicle, remove the axle nut
-Bring up the vehicle and remove the wheel and totally of the brake parts
-Take away the axle from the transmission and steering knuckle
-Using a hydraulic press, separate the wheel hub from the steering knuckle
-Take out the support plate and snap-ring securing the wheel bearing
-Set up the snap-ring, any needed seals and the mount plate
-Press in the wheel hub while supporting the inner wheel bearing race and re-install
-Test drive the vehicle to verify that the new wheel bearing is smooth and placid
Was this
answer
helpful?
Yes
No
Monday, June 16th, 2014 AT 4:08 AM

Please login or register to post a reply.

Sponsored links