Hard time getting it into 1st and 2nd gear

Tiny
JERRY FRAGIONE
  • MEMBER
  • 1997 FORD F-150
  • 12,000 MILES
I have a 1997 ford f150xl 4.2 5 speed manual trans and I am having a hard time getting it into 1st and 2nd gear 3rd and 4th 5th and rev is fine. I would like to fix it or find a site to show me how thanks

Fuild is full shifter rod is out
Monday, March 19th, 2012 AT 4:19 PM

5 Replies

Tiny
RIVERMIKERAT
  • MECHANIC
  • 6,110 POSTS
It could be the synchros in the transmission or a bent part, such as a shift rod or fork. If you want to try and tackle it yourself, I would recommend getting access to a repair manual. You can either buy one at a parts store, or buy a subscription to one here:

https://www.2carpros.com/articles/mitchell1eautorepair-car-repair-manuals
Was this
answer
helpful?
Yes
No
Monday, March 19th, 2012 AT 5:04 PM
Tiny
JERRY FRAGIONE
  • MEMBER
  • 3 POSTS
R the synchros ajustable
Was this
answer
helpful?
Yes
No
Monday, March 19th, 2012 AT 5:19 PM
Tiny
RIVERMIKERAT
  • MECHANIC
  • 6,110 POSTS
No, they're replaceable. Take a look at the pictures. It's not terribly difficult, but does require some special tools, which you should be able to rent/borrow from parts stores. You should either subscribe to an auto repair reference manual online (https://www.2carpros.com/articles/mitchell1eautorepair-car-repair-manuals) or buy a manual from said parts stores. There's just too much information and imagery that you'd need to do it right.
Was this
answer
helpful?
Yes
No
Monday, March 19th, 2012 AT 5:39 PM
Tiny
JERRY FRAGIONE
  • MEMBER
  • 3 POSTS
Thank you you have been very halpfull again thank you
Was this
answer
helpful?
Yes
No
Monday, March 19th, 2012 AT 6:06 PM
Tiny
RIVERMIKERAT
  • MECHANIC
  • 6,110 POSTS
My pleasure. Thanks for using 2carpros. Be sure to tell your friends about us.
Was this
answer
helpful?
Yes
No
Monday, March 19th, 2012 AT 6:11 PM

Please login or register to post a reply.

Sponsored links