SPONSORED LINKS

No power!

Tiny
ESTROUD06
  • MEMBER
  • 1997 FORD EXPLORER
  • V8
  • AWD
  • AUTOMATIC
  • 141,796 MILES
I have a 1997 ford Explorer! It was just clicking and no turning over! Put A starter on! Still clicking! Was told to peplace the starter solenoid next to the batt! Now I have no power anywhere! I used my test light and there is power from the batt to the solenoid but no light in the truck not ever the dome light! All fuses look good! And yes I did disconnect the batt before I started!
SPONSORED LINKS
Tuesday, February 1st, 2011 AT 7:50 PM

4 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Check and test all the fusible links-start here more assistance needed come on back
Was this
answer
helpful?
Yes
No
Tuesday, February 1st, 2011 AT 8:24 PM
Tiny
ESTROUD06
  • MEMBER
  • 3 POSTS
Checked all fuses! All are not busted but none all lighting with my test light!
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, February 1st, 2011 AT 10:41 PM
Tiny
ESTROUD06
  • MEMBER
  • 3 POSTS
None are lighting with my test light! But none are busted! But even if one was I should have some powr to something! A dome light or aq head light! The batt has power and its going to the soleniod! So it should get to something! Right!
Was this
answer
helpful?
Yes
No
+2
Tuesday, February 1st, 2011 AT 11:50 PM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Check and test the fusible link this is where power starts at-see below-its either at the starter relay or the alternator smaller wire with a lump on it-this is the link-
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
Wednesday, February 2nd, 2011 AT 12:38 AM

Please login or register to post a reply.

Related Starter Solenoid Content

VIEW MORE

Sponsored links