Do I have to reach the alternator bolt from underneath the car and also do I have to take the compressor off to pull the alternator out??
Nov 8, 2011 at 8:17 AM
how do I reach the back alternator bolt for a 1996 infiniti I 30
1996 INFINITI I30
REDZ8208
- MEMBER
- 1 POST
- FOLLOW
Advertisement
GENERATOR
Removal & Installation
Remove right engine undercover. Remove side inspection cover on right side. Loosen drive belt idler pulley, and remove belt. Remove 4 A/C compressor mounting bolts. Remove cooling fan and fan shroud. Slide A/C compressor forward. Disconnect generator harness connector. Remove generator upper and lower bolts. Remove generator. To install, reverse removal procedure.
Removal & Installation
Remove right engine undercover. Remove side inspection cover on right side. Loosen drive belt idler pulley, and remove belt. Remove 4 A/C compressor mounting bolts. Remove cooling fan and fan shroud. Slide A/C compressor forward. Disconnect generator harness connector. Remove generator upper and lower bolts. Remove generator. To install, reverse removal procedure.
Nov 8, 2011 at 10:15 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.